A: Voice, Data (GmPRS), SMS and FAX.

A: English, French, Arabic, Urdu, Farsi, Russian.

A: The PCO-2110 keypad can be used to write SMS for sending, and any SMS that is received on this PCO can be printed using the PCO’s printer. The PCO will display an icon when unread messages are available.

A: The PCO-2110 has a FAX port (RJ 11) and any standard analog fax can be connected to it. The fax port will only receive the incoming fax. Depending on the type of the fax machine, the PCO will remember the settings of this particular fax model. If you connect a different fax model, then you will need to turn the PCO off and on again to reset.

A: Data service is broadly categorized into four types:
Data call to the OTA (Over The Air) server for remote data base downloads and system health status information. Incoming data call from the OTA server is automatically answered, and the system is held in OTA mode for system reports, updating to the server and database download from the server.
Point-to-Point data calls can be established using the system USB port. During the call connection, data throughput is calculated and billed, based on the data exchanged.
GmPRS Data Call: For internet browsing, GmPRS commands can be issued from the system’s USB port and also the dial up connection can be established. Data throughput calculation facility is also provided for the GmPRS connection.
Data billing is programmable. The tariff rate can be programmed in the program modes included in the system.

A: No, parallel usage is not possible.

A: 1. Connect your computer (PC/laptop) to the USB of the PCO
     2. Assign the standard modem settings on your PC @ 19200
     3. Select the ‘Data’ mode on the PCO
     4. Get Connection
     5. Start Browsing
     6. When done, the PCO will automatically print the receipt with the amount, duration, and data use for billing purposes

A: 14.2V, 3A SMPS supply in the form of an adapter, having the following specifications:
     1. Input minimum cutoff voltage: 90VAC
     2. Input maximum cutoff voltage: 270VAC
     3. Primary cable: 2 Pin Power cord with 1.8 meters length
     4. Secondary cable: molded 2 wire cable

A: Graphical printer
     Graphical LCD
     Display of Network Signal Strength on the LCD (console display)
     Local chargind of calls using the locally installed tariff talbes. The PCO operator can add margin/ taxes
     with password protected menu access
     Pre-programmed list of country codes
     40 days cumulative/ individual day report
     Display scrolling facility for the last, current day report, memory calls and cumulative details
     Programmable paper feed option

A: The Thuraya PCO-2110 package includes: Thuraya PCO unit, Booth Display unit, Satellite antenna with 25 meters of cable, GPS antenna
with 25 meters of cable, Printer Paper Roll, Booth Display Cable with RJ11 Connectors, Line-out Cable (Grey) with RJ11 Connectors, External Battery Cable,
Quick Installation, Quick Trouble Shooting Guide User ManualTelephone extension shall be provided by the service providers/ distributors

A: Insert SIM and Paper roll, Connect using SAT and GPS antennas, Connect telephone extension and booth display, Power on, obtain network
and GPS fix, Your Thuraya PCO is ready to make the first call.

A: Place the GPS antenna outside on a flat surface with a clear view of the sky. 
Power up Thuraya PCO by pressing the power button.
Thuraya PCO is now attempting to locate itself using GPS. This may take up to five minutes. 
Please refer to User Manual for further information.

A: The SIM card is placed in the rear side of the unit.

A: The Thuraya PCO is designed only for indoor use and not recommended to be used outdoors.

A: No.

A: No.

A: The Paper Roll used for the PCO is the standard roll used for credit card machines and other similar devices.